Drone Reviews | Quadcopter Tests | First Quadcopter (2024)

KOSPET TANK T3 Ultra review: A near-perfect rugged smartwatch

The last time I wore a watch was in the 80s, a Casio with a built-in scientific calculator that can be considered the great-grandfather of today's modern smartwatches like the KOSPET TANK T3 Ultra.This month, Kospet updated their T and M series smart watches. The T3 Ultra and M3 Ultra share similar features but have different designs. The built-in...

Read more

BLUETTI AC200L review: My fifth Power Station – and the Biggest one!

Portable power stations like the BLUETTI AC200L are the successor of noisy and heavy gas generators, and they enable off-grid living and working by providing DC and AC. With a massive output of 2400W, the AC200L can handle 99% of commonly used devices in your home or outdoors.I built a 3x4 meters tree house two years ago, 100 meters...

Read more

Skystars Koko 2207 1950Kv: Racing and freestyle FPV motor for 5″ drones

I received these Koko 2207 motors and a SKYSTARS F722HD flight stack two years ago, but somehow I forgot to review them. The motors have 16x16mm and can be installed on most 5-5.5" FPV frames, regardless of design and type.The Skystars Koko 2207 motors have four KV options (1750KV, 1950KV, 2550KV, and 2750KV) and are suitable for racing and...

Read more

I tried the Zhiyun Fiveray M40 pocket light — and it’s bright as a Star!

The Zhiyun Fiveray M40 pocket LED panel was designed as a lightweight, handheld, and tripod-mountable video light for Vloggers and content creators. The combination of 88 cool and 88 warm light LEDs can generate up to 40W of power with an adjustable color temperature from 2700 to 6200K.Pocket continuous lights like the Fiveray M40 are perfect for shooting videos...

Read more

LN Motor FS3115 900KV: Cinelifter Motors for 9-10″ FPV drones

The FS3115 900KV brushless motors from LN-Motor are intended for 9 and 10 inch cine-lifter FPV drones. These motors can be used in X4 and X8 configurations, depending on how much payload you expect to install on your drone. Each motor can generate a max thrust of 4kg when equipped with a Genfan 10" propeller or 3.3kg with an...

Read more

I’ve been testing the Jumper T14 for 2 weeks – here’s the pros and cons

The Jumper T14 is the company's third radio controller reviewed here on FirstQuadcotper. The T14 is a mid-level transmitter with a built-in 1W ERLS module. It adopts RadioMaster Boxer and TBS Mambo-like form, factor, and layout. Not everything about the T14 is whoa-inducing; it lacks flight mode buttons, and the antenna is not removable for upgrade purposes.JumperRC released the...

Read more

SUNLU 3D Printer Enclosure: An absolutely essential accessory!

3D printers are like dust magnets; if you don't cover them with something in a few days, they will be covered by a fine layer of particles. Moving parts are greased with vaseline, from which the dirt is difficult to remove. The SUNLU 3D Printer Enclosure offers excellent protection against dust and water and provides the constant temperature required...

Read more

RushFPV BLADE F7 AIO: FC for Hassle-free FPV drone building

RushFPV is known for its easy-to-use, solder-free flight controllers. This review will examine their latest BLADE F7 45A AIO flight module with a built-in 45A ESC.An AIO (All-In-One) flight controller is a type of flight control system used primarily in compact FPV drones. AIOs integrate multiple components necessary for drone flight into a single circuit board. This integration commonly...

Read more

RadioMaster Bandit ExpressLRS: 915MHz ELRS RX and TX

After testing so much 2.4GHZ ELRS hardware, I thought it was time to review some 915MHz equipment too. RadioMaster's Bandit series includes three TX units (RF, Micro, and NANO) and two RX modules (BR1 and BR3). In this article, we will check out the features and how to set up the Bandit Nano transmitter module and BR3 radio receiver.ExpressLRS...

Read more

Zhiyun FIVERAY M20C: Light Up The Sky!

Drone light painting empowers photographers to craft avant-garde content using photographer-controlled light from the sky. The Zhiyun FIVERAY M20C is sufficiently small and lightweight to be installed on most consumer drones, allowing the creation of viral social media content. With more than 16 light modes, it will make your drone look like a UFO. Its built-in battery allows about...

Read more

Fullsend 6S 6000mAh Li-Ion: Holy Grail of long range FPV

Lithium-ion or Li-ion batteries generally have a higher energy density than other battery chemistries, including LiPo. This means that Li-ion packs can store more energy in the same physical size, allowing longer flight times and increased range. For example, by comparison, the iFlight Fullsend 6S 6000mAh weighs just 608 grams, and a LIPO battery with the same power weighs...

Read more

123...32Page 1 of 32

Drone Reviews | Quadcopter Tests | First Quadcopter (2024)

FAQs

What was the first quadcopter drone? ›

Around 1907 Jacques and Louis Breguet, French brothers, built and tested Gyroplane No 1, a quadcopter. They managed take-off, although the design proved to be very unstable and hence impractical. In 1924 French engineer Étienne Oehmichen flew his quadcopter a distance of 360m (1,181ft) setting a world record.

Is the xkr6 drone any good? ›

Each battery provides a flight time of approximately 20 minutes, giving you ample time to explore and capture breathtaking footage. With its sleek design, intelligent flight modes, and advanced features, the XKRC X6 Pro Drone is a top-notch remote control aircraft that delivers exceptional performance and reliability.

What's a good budget for a beginner drone? ›

Comparison Table of Best Budget Drones
ModelWeightPrice
Ryze TelloApprox 80gm$99
Autel Evo Nano+under 249g$679.00
Holy Stone HS110G176gm$159.99
Potensic ATOM SEunder 250gm$229.99
4 more rows
Mar 21, 2024

What is the 1 to 1 rule drone? ›

In addition, I must comply with the 1:1 rule. This means that the number of meters of horizontal distance must be at least equal or more than the number of meters of altitude (e.g.: If I fly at 40m height, I must fly at least 40m away from people).

What is the difference between a drone and a quadcopter? ›

A drone is the parent term that refers to an Unmanned Aerial Vehicle [UAV] with no passenger, crew or pilot on board. A drone is also a common word people use when they see an aircraft with four rotors (quadcopter). However, it's essential to understand that drones can be more than an aircraft with four rotors.

Are quadcopters safer than helicopters? ›

helicopters? #Quadcopters are more maneuverable, able to fly in tighter spaces, and are generally less expensive to operate. The eVTOL or drones are generally considered to be safer than helicopters due to their smaller size and lighter weight.

What is the difference between a quadcopter and a Quadrotor? ›

The term quadcopter specifically describes an uncrewed rotary wing aircraft that can take flight using four rotors each consisting of a motor and propellers. Quadcopters are sometimes referred to as quadrotors as well.

How much should I spend on my first drone? ›

Beginner toy drones range from $30 to $90, while entry-level camera drones range from $299 to $499. Mid-level consumer drones are expected to range between $600 and $1,000. High-end professional drones are priced at $3,000 and above.

Are expensive drones easier to fly? ›

You can perform most maneuvers with cheaper drones as long as flight doesn't require too much control wrestling, but the cheapest lower-end models often have poor gimbals so learning how to combine flight maneuvers with gimbal/camera tilts can be impossible.

What drone do Navy Seals use? ›

Unmanned Aerial Vehicle (UAV): ScanEagle

One of the operational advantages of the ScanEagle is its flexible catapult launch capability and skyhook recovery system, which is essentially a rope hanging from a 50 foot pole. It can be flown from forward battlefields, mobile vehicles and small boats such as the Mark V SOC.

What is the best drone to make money with? ›

First things first, you'll need a drone that's capable of serving your purposes. DJI is known as one of the leading manufacturers in the drone business for a reason, and the DJI Mavic 3E model is an excellent choice for those who want to create aerial footage. This features: A wide-angle 4/3 CMOS, 20MP sensor.

What is the number one drone brand? ›

DJI is the world's largest drone manufacturer commanding a market share of over 70% worldwide. The company offers a wide range of drones for both professional and consumer use and is known for its high-quality products, advanced features, and excellent customer service.

Are cheap drones worth it? ›

Going cheaper isn't always a compromise

The least expensive drones, those that typically cost less than $80 / £100 are, for the most part, not worth considering. These typically fly erratically and you spend more time simply trying to keep them in the air.

What is a good idea before flying your drone for the first time? ›

Before flying a drone for the first time, there are five key things that you must do: 1) Learn how to fly your drone safely, 2) Check your permissions, permits and rules of the airspace, 3) Consider what and how many batteries you will need 4) Consider your storage requirements and 5) Conduct a risk-assessment and pre- ...

References

Top Articles
Latest Posts
Article information

Author: Tyson Zemlak

Last Updated:

Views: 5860

Rating: 4.2 / 5 (43 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Tyson Zemlak

Birthday: 1992-03-17

Address: Apt. 662 96191 Quigley Dam, Kubview, MA 42013

Phone: +441678032891

Job: Community-Services Orchestrator

Hobby: Coffee roasting, Calligraphy, Metalworking, Fashion, Vehicle restoration, Shopping, Photography

Introduction: My name is Tyson Zemlak, I am a excited, light, sparkling, super, open, fair, magnificent person who loves writing and wants to share my knowledge and understanding with you.